Call Us: +86-592-729-1257 & 0086-137-994-68068

Article&News

What materials could be cut by using the diamond wire saw?


Diamond wire saw could be used for cutting granite, marble, sandstone and other stone quarry. In fact, diamond wires could be used for cutting all materials, like reinforced concrete, cement, iron, asphalt, ceramic, glass and so on.
 
Why the diamond bead and diamond wire may be ripped/destroyed during cutting?
There are four reasons that diamond wire and diamond bead may be destroyed during cutting, the first one is that the diamond wire saw has already worn out; the second one is not use the liquid cooling system, or not add water while cutting; the third one is diamond wire saw could not be mouted correctly; the fourth one is decline or rise its  speed abruptly which out of it capacity.


What's the difference between sintered and electroplated diamond saw wires?

There's two different methods  to bond diamond for the pear: first by using galvanizing process in the nickel bath, second by using blending metal and diamond sintered in oven or in graphited mould.
 

Thank you for your interest in the above content, please leave us inquiry, you can expect a response within 24 hours.

Make sure you enter the (*) required information where indicated. HTML code is not allowed.

Click image to refresh

Notice

2021 Russia Stone Industry International Exhibtion in Moscow

 

Our company is going to participate in Stone Industry International Exhibition which will be held in  Russia, Moscow, VDNKH, Hall 75, booth No.B21 from April 3 to 6, welcome to visit our booth and  have a face-to-face discussion. You will see our samples there, if you have any requirement on diamond  tools for stone or construction, we can take there for you.

 


World of Concrete Las Vegas 2018

International Exhibition and Conference on Construction